Lockpick: Difference between revisions

To Pop is to draw cards into your hand from one of the face-down Code Stack decks. The quantity of cards you should draw is decided by the six-sided die. The deck you should draw from is decided by the color die. If there are not enough cards in the face-down Code Stack deck that is indicated by the color die, but there is at least one, just draw as many as are available.

 

To Push is to lay down all the cards in your hand, one by one, onto the cascading card columns (the "Pick Stacks"). Begin by placing a card onto any Pick Stack column you wish. Then choose a direction (left or right) and place one card from your hand onto each column in the direction you chose. You can rearrange your hand any way you like before placing the cards onto the columns. When you hit the edge of the board, '''wrap around to the other side'''. Make sure to place the new card so that it cascades down from any previous cards: the values of all cards in the Pick Stack columns should remain visible. See example below.